Vulcan-hart EF5 ML-114944 Manuel d'utilisateur télécharger pdf (Page 8)

– 8 –

6. Remove thermopile from pilot bracket.

7. Reverse procedure to install.

PILOT ORIFICE

WARNING: SHUT OFF THE GAS BEFORE

SERVICING.

WARNING: ALL GAS JOINTS DISTURBED DURING

SERVICING MUST BE CHECKED FOR LEAKS.

CHECK WITH SOAP AND WATER SOLUTION

(BUBBLES). DO NOT USE AN OPEN FLAME.

1. Remove pilot assembly from fryer as outlined

under thermopile.

2. Remove hex nut on the bottom of the pilot to

expose the orifice.

3. Replace orifice and reverse procedure to

assemble.

COMBINATION VALVE

WARNING: SHUT OFF THE GAS BEFORE

SERVICING.

WARNING: ALL GAS JOINTS DISTURBED DURING

SERVICING MUST BE CHECKED FOR LEAKS.

CHECK WITH SOAP AND WATER SOLUTION

(BUBBLES). DO NOT USE AN OPEN FLAME.

1. Disconnect fryer from main gas supply.

2. Remove heat shield as outlined under Covers

and Panels.

3. Remove right burner as outlined under

Burners.

4. Disconnect lead wires from combination valve

and mark for reconnecting.

5. Disconnect pilot tubing from combination

valve.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire