Vulcan-Hart 60LC Guide de dépannage télécharger pdf (Page 10)

— 10 —

4. Exercise caution when placing brick in a thermostatically controlled griddle section. DO NOT hit thermostat

bulb while installing bricks. The thermostat bulb is a sensitive device and may be easily knocked out of

adjustment.

Into the 6

/2" (165 mm) wide baffle, install:

a. Two 10" x 4" (254 x 101.6 mm) bricks, placing the miter edge, one to each side of the front burner baffle

area (Fig. 4).

b. Two 7" x 4" (177.8 x 101.6 mm) bricks, one to each side of the rear burner baffle area (Fig. 4).

Fig. 4

5. Into the 9

/8" (251 mm) wide baffle, install:

a. Two 10" x 4" (254 x 101.6 mm) bricks, placing the miter edge, one to each side of the front burner baffle

area (see Fig. 4).

b. Two 7" x 4" (177.8 x 101.6 mm) bricks, one to each side of the rear burner baffle area (see Fig. 4).

6. If burner has been strapped down, remove the wire strapping device, using wire cutters.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Pas de commentaire

Vulcan-Hart 60LC Guide de dépannage Page 10