Vulcan-Hart SG4D ML-114875 Guide de dépannage télécharger pdf (Page 11)

— 11 —

VENT SYSTEM

DO NOT obstruct the flow of flue gases from the flue located on the rear of the oven. It is recommended

that the flue gases be ventilated to the outside of the building through a ventilation system installed by

qualified personnel.

Ovens may use an optional down draft diverter flue method. This optional down draft diverter must be

purchased from the oven manufacturer and vented to the outside; otherwise, the installation of any

such devise will void all oven certifications and warranties. When the diverter is supplied, it may be

connected to a Type “B” vent.

From the termination of the flue to the filters of the hood venting system, a minimum clearance of

18" (457mm) must be maintained.

Information on the construction and installation of ventilating hoods may be obtained from the standard

for "Vapor Removal from Cooking Equipment," NFPA No. 96 (latest edition), available from the

National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 55 56

Pas de commentaire

Vulcan-Hart SG4D ML-114875 Guide de dépannage Page 11