Vulcan-hart GHF91G ML-135503 Manuel d'utilisateur télécharger pdf (Page 5)

– 5 –

THERMOSTAT

WARNING: SHUT OFF THE GAS BEFORE

SERVICING.

1. Drain shortening from fry tank.

2. Remove left burner as outlined under Burners.

3. Remove thermostat knob by pulling knob off

thermostat shaft.

4. Remove thermostat mounting screws and

remove thermostat from mounting bracket.

5. Remove wire leads from the rear of the

thermostat, noting all connections for

reassembly.

6. Loosen the packing nut and holding nut.

7. Remove the thermostat bulb from the clamp.

8. Pull the thermostat bulb through the underside

of the fry tank and remove the thermostat

assembly.

9. Reverse the procedure to install. When

installing the new thermostat assembly, do

not kink the thermostat capillary. Wrap threads

of packing nut with Teflon tape to prevent

leakage.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Commentaires sur ces manuels

Pas de commentaire