Vulcan-hart GDC48 ML-52583 Manuel d'utilisateur télécharger pdf (Page 12)

— 12 —

Tools required:

/16 socket (magnetic)

/4 drive

/4 drive universal joint

/4 drive 6" extension

/4 drive ratchet

1. Remove platen cover (Fig. 3).

2. Remove all bolts from platen. Remove platen surface. (Fig. 4)

Fig. 3 Fig. 4

3. Clean surface thoroughly. Make sure all foreign particles are removed from both surfaces (Fig. 5).

4. Attach new surface to platen with new (10) short and (2) long

/4-20 special bolts and (12)

/4-20

locknuts. Tighten all bolts and nuts finger tight. (Fig. 6)

Fig. 5 Fig. 6

1 2 ... 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Vulcan-hart GDC48 ML-52583 Manuel d'utilisateur Page 12