Vulcan-hart GDC48 ML-52583 Manuel d'utilisateur télécharger pdf (Page 13)

— 13 —

5. Tighten all bolts and nuts firmly (do not overtighten), with

/16 wrench, in numerical order as shown

in the diagram (Fig. 7). CAUTION: Overtightening can deform the aluminum material of the

platen.

The holes in the platen surface and the heads on the special bolts are eccentric. Make sure the

head of each bolt fits into the hole in the platen surface and stays there until the nut is finger

tightened.

6. Reinstall platen cover (Fig. 8)

Fig. 7 Fig. 8

SERVICE AND PARTS INFORMATION

To obtain service and parts information concerning this duplex cooker, contact the Vulcan-Hart Service

Agency in your area (refer to listing supplied with the duplex cooker), or Vulcan-Hart Company Service

Department at the address or phone number shown on the front cover of this manual.

1 2 ... 8 9 10 11 12 13 14 15 16

Pas de commentaire

Vulcan-hart GDC48 ML-52583 Manuel d'utilisateur Page 13